First, the whole weighing process can be divided into three stages: fast feeding, faster feeding, and slow feeding, each stage is perfect. At the same time, it can be equipped with automatic sealing equipment and conveying equipment to form a highly automated production line. Guangdong XTIME Packaging Equipment Co., Ltd. is a manufacturer specializing in the production and sale of various can and bottle packaging systems. With rich experience in rice packing.
Second, after the packaging scale enters the automatic operation state, the weighing control system opens the feeding door to start feeding. (https://www.xtpackagingmachine.com/full-automatic-quantitative-packing-production-line-for-granule-p-59.html )The feeding device is a fast and slow two-stage feeding mode; when the weight of the material reaches the set value of the fast feeding, the fast feeding is stopped. Keep feeding slowly; when the weight of the material reaches the final set value, close the feeding door to complete the dynamic weighing process; at this time, the system detects whether the bag clamping device is in a predetermined state, and when the bag is clamped, the system sends a control signal Open the weighing hopper discharge door, the material enters the packaging bag, the discharge door of the weighing hopper is automatically closed after the material is discharged; the bag clamping device is released after the material is discharged, the packaging bag automatically falls; the packaging bag is sewn after it is dropped And transport to the next station. In this way, it runs reciprocally and automatically.
1. Packaging machinery has a wide range of uses in the market: food, chemical, pharmaceutical, and light industries are all used (and some agriculture production).
2. Easy to use (automatically complete bag making, metering, blanking, sealing, slitting, counting, batch number printing, and other functions.)
3. High efficiency: The output of packaging machines in the Chinese market can be close to 120-240 pack minutes to replace the handmade products in the 1980s, and the output is much more than several times that of the time.
4. Clean, hygienic, and energy-saving. Use the packaging machine to be clean and hygienic, no manual work is required. It is possible to use clean, hygienic, material-saving, bag-saving, cost-saving, and environmentally friendly functions.
5. Side-opening protective baffle with good visibility, and safe operation.
Various crystal, granular, and fine granular materials. For example chemical raw materials, washing powder, salt, feed, yeast, food, sugar, chicken essence, monosodium glutamate, seeds, grains, melon seeds, etc.
3 Equipment performance description and characteristics
1. Weighing range: 20-2000g (related to reference materials)
2. Weighing accuracy: ± 1-3g (accuracy is related to materials)
3. Weighing speed: canning speed 15-25 cans/minute, bagging speed 30 bags/minute
4. Large hopper capacity: 40L, combined scale single bucket capacity: 3L
5. Driving method: stepper motor
6. Operation interface: 7-inch touchscreen
7. Filling diameter φ40 ~ φ130mm, applicable height 50 ~ 200mm (customized according to the size of the jar)
1. The equipment must touch the grounding wholly, and the grounding resistance must be lower than 4Ω, and avoid being disturbed by nearby electromagnetism and electricity.
2. Keep it clean and clear up dust instantly to prevent it from entering the controller box, electricity, air changing box, switch, etc. Meanwhile, keep water, oil, and metal out of them, the manual switch-control and button must be checked and cleaned termly.
3. If the machine doesn't work, is handed over, or has few materials in the storage, the scale must be in pause, and clamp package bag to make the scale in a state of low waste, and avoid the scale being in the state of feeding, esp. in quick feeding.
4. Less to use manual operation as it is easy to bring beyond error. If the beyond error is taken, you need to weigh it, then start to sew or heat seal. When we use a manual operation to feed, we can't lose the feeding button until completing feeding so as not to make material in the storage spill out.
5. The power supply will be under protection if a switch is changed in less than 15 seconds, so you need to keep 15 seconds to turn it on after the machine is turned off.
6. The dust and sundries of scale must be cleaned by compression air, then turn off the power supply and air source.
Phone: +86 15202082747
Address: 17-She Industrial Park Hecun,Chengjiao Street, Conghua District, Guangzhou China